Arcade 8' Dark Green Pool Table Felt

We got you covered! Arcade by Forstmann is a hard-wearing and economical choice for high-traffic pool tables. This billiard cloth was developed specifically for the coin-op trade, introduced at the 2001 BCA (Billiards Congress of America) International Trade Expo. "Durability and low cost are key considerations for the route and arcade owners who service pool tables located in high traffic areas," said Terry Winkler, ForstmannÕs director of specialty fabrics.

 If it can stand up to the hard use it gets in commercial environments, it will certainly last a very long time on home pool tables. Its weight is 22oz, and is a 75% wool / 25% nylon blend. Enough cloth is included to cover the pool table bed and rails.

Pool Table Cloth Q & A

Q: What size is my pool table?
A: Simply measure between the rails, and refer to the chart. click for larger pool table cloth sizing chart.

Q. Can I recover my pool table by myself?
A: Yes. If you feel comfortable using a wrench and a stapler, it should be a fun project.

Q: What do i get when I order the felt?
A: You will receive one piece of cloth that is sufficient to cover the bed of the table and the six rails. Installation instructions are also included.

Q: Do I need glue?
A: That depends. On some pool tables, the cloth is held in place by a band of glue around the edges of the slate. Other tables have staples securing the cloth.

Q: Which side of the cloth is up?
A: The smooth side with the manufacturer's logo is the top side

Q: What size do I cut the rail cloth strips?
A: You must cut your rail cloth from the piece of cloth sent. Cut the cloth for the bed then "snip and rip" the cloth for the pool table rails from the cloth remaining..

Q. What do you mean, "snip & rip"?
A: To make perfect cuts, simply make a one inch cut in the cloth, then just rip it! Woven cloth easily tears in a straight line.